LOCTITE 319 ADHESIVE FOR MIRRORS 0.5ML

Welding kit for interior mirrors on the windshield and glass / metal.

Instructions for use
The kit consists of a small glue tube and a piece of special nylon impregnated with an adhesive actuator, with a surface of 4cm2.
Remove the metal mirror mount bracket from the outside of the windscreen.
Mark with a marker on the outer surface of the windscreen the place where you want to place the mirror.
With a small blade, remove any old glue from the windshield. The glass surface must be clean and dry.
Depending on the dimensions of the metal bracket, cut a piece of impregnated nylon. The special nylon must be gripped with clean hands.
Spread the glue evenly on the metal bracket. Now place at this point the piece of nylon that you have already cut to measure the bracket.
After a few seconds, place the metal bracket in the marked position on the windscreen.
Hold the bracket firmly in this position for at least 30 seconds.
After 15 minutes, you can place the mirror on its support.