RUSTOLEUM 9010 NOXYDE WATER-BASED CORROSION PROTECTION

NOXYDE®

Ultimate corrosion protection, even in severe conditions

200% elastic coat does not crack or peel

Excellent coverage of nuts, bolts and welds

Dry fall: saves preparation & clean up time

Primer and topcoat in one

UV- and impact-resistant

Single pack water-based elastomeric coating based on a modified acrylic binder with unequaled corrosion protection, >15 years in the highest corrosion class C5-M, according to ISO 12944.

Application type:Airless Spraygun

Substrate:Metal, Metal Cladding, Roof

Substrate Metal:Aluminium, Bare or blasted metal, Galvanised steel, Non-ferro metal, Prepainted metal, Rusted metal, Stainless Steel

Substrate Metal Cladding:Bare or blasted metal, Galvanised Steel, Pre-painted, Rusted Metal, Weathered Plastisol

Substrate Roof:Metal Roof, Pre-painted

Touch dry:1,5 hours

Dry to recoat:24 hours

VOC level:15 g/l

PRACTICAL CONSUMPTION
Practical coverage depends on many factors such as porosity and roughness of the substrate
and material losses during application.

SURFACE PREPARATION
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam)
cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to
be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressurewater
jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On newgalvanised
surfaces, newzinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferrous
substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting
Noxyde colours for subsequent layers.

DIRECTIONS FOR USE
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONS
Temperature between 8 and 55°C / Air humidity max. 80% R.H.
The substrate temperature must be at least 5°C above dewpoint.

APPLICATION & THINNING: BRUSH
Undiluted as a rust preventive paint.


Diluted with approximately 25% volumewater as an adhesion primer (consumption about
100 g/m²).