RUSTOLEUM MULTI-SURFACE COMBICOLOR SOLUBLE PAINT

Revolutionary soluble paint suitable for wood, metal, tiles, glass, concrete, wall, PVC etc, without a primer, for exterior or interior use.

Excellent adhesion
Excellent coverage
Perfect finish Non-yellowing over time
Economical solution for multiple applications

Coverage:10m²/L

Drying Time:2 hours

Time Between Coats:8 hours

Use:INTERIOR & EXTERIOR

Application Method:ROLLER, BRUSH

Tool Cleaner:WHITE SPIRIT

Rust-Oleum® CombiColor® Multi-Surface 7300 coating is a solvent based primer and topcoat
in one, based on a modified Alkyd binder, providing good adhesion to many types of substrates. The product is lead- and chromate free.

RECOMMENDED USES
Rust-Oleum CombiColor Multi-Surface 7300 can be applied on many different substrates like
wood, metal, mdf, masonry, tiles, most rigid plastics, old concrete and more. We advise to do
a small adhesion test prior to the application of the full surface. CombiColor Multi-Surface is
intended for brush and roller application.
For metal structures in a more aggressive industrial environment we advise CombiColor Original in combination with Rust-Oleum CombiPrimer Anti-Corrosion 3369/3380.

TECHNICAL DATA
Appearance: High gloss, Satin, Matt.
Density: 1.00-1.60 depending on colour / gloss level
Solids Content: 55% by volume ± 2.0 depending on colour
Viscosity: 85-90 Krebs Units at 20°C
Recommended film thickness: 45 µm dry, equals 82 µm wet per coat
VOC-content: 420 g/l max.
Ready-to-use mixture: 420 g/l max.
Category: A/i
EU Limit values: 500 g/l (2010)

Coverage
Theoretical: 9 - 10 m²/l at 45 µm dry per coat, depending on colour.
Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

SURFACE PREPARATION
Remove oil, grease and all other surface contaminations by alkaline cleaning in combination
with appropriate detergents. Remove rust scale, loose mill scale, loose rust and loose coatings by scraping, wire brushing or sanding.
Sand intact coatings to roughen the surface slightly. Test before application the compatibility
with the old coating. The surface must be clean and dry during application.
New galvanised (bright aluminium-like finish), Zinc and Aluminium (new and old) surfaces
have to be primed first with CombiPrimer 3302.
Aged galvanized (matt grey appearance, showing white rust) should first be cleaned with an
acid cleaner (e.g. Rust-Oleum® SE108) or by mechanical abrasion with for example ScotchBrite.
Very porous surfaces should be sealed prior to application of CombiColor® Multi-Surface.

DIRECTION FOR USE
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
APPLICATION & THINNING
Brush: Use natural bristles, long hair brushes.
Thinning generally not required

Roller: Use short nap, poly-amid (Perlon) 6-12 mm rollers.
Roller application may require 2 coats to achieve recommended dry film
thickness Thinning generally not required.

Air-atomised spray: Not recommended.

Cleanup: Use Rust-Oleum Thinner 160.

APPLICATION CONDITIONS
Temperature of air, substrate and coating material between 5° and 35°C and relative humidity
below 85%. The substrate temperature must be at least 3°C above dew point.

SAFETY
Consult Safety Data Sheet and Safety Information printed on the can.

SHELLIFE / STORAGE CONDITIONS
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in
direct sunlight at temperatures between 5° and 35°C.