SARATOGA GLUE TOTAL REPAIR GENERAL USE

APPLICATIONS
Ideal for repairs in: aluminum, iron, stainless steel, copper, concrete, ceramics, tiles, porcelain, wood, particle board, cork, leather, fabric, paper, cardboard, expanded polystyrene, gypsum, natural stone, granite. Not suitable for PE, PP, rigid polystyrene, ABS, PTFE.

BENEFITS
Ideal for all repairs, without solvents and odorless, it sticks to all the most common materials, withstands vibrations, bends, vibrations, ultraviolet radiation and is also used for difficult welding and in extreme conditions, used both indoors and outdoors. Excellent transparency.

METHOD OF IMPLEMENTATION AND INSTRUCTIONS
Surfaces must be clean, dry and degreased.

Apply a thin layer of glue to one of the surfaces to be bonded (for porous materials use a higher layer of glue)

Connect the two parts immediately and hold them firmly for a few minutes (with the help of adhesive tape or clamp), handling after at least 30 minutes, final sealing after 24 hours.

For invisible welding: apply a thin layer of glue, press well so that there is no air between the glued parts, join the pieces and do not move them for at least 30 minutes.

Immediate cleaning with nitro-solvent or acetone, when cured can be removed with a razor blade.